Slim Can Motor Shaft Sleeve (1.5mm ID)

> 1/32 Slot Car Parts (by Brand) > M/T Motors > Slim Can Motor Shaft Sleeve (1.5mm ID)





Motor shaft sleeve designed for slim can motors (FF-050) with a 1.5mm ID and 2.0mm OD.  Examples of slim can motors include the Minnow 18 , M/T SL1 and M/T SL2.


Package contains one (1) 3 inch long piece of sleeve material that can be cut into desired lengths.


How To Use

PLEASE NOTE - The sleeve is NOT intended to press a 2.0mm pinion onto - attempting to do so may result in a damaged motor.  Instead, cut the motor shaft to length, press a 1.5mm ID pinion onto the motor shaft and then cut/install a short sleeve on the end of the motor shaft so it rides in the crown gear's hub.  This will help position the crown gear for proper mesh with the pinion gear.  Secure the sleeve using Loctite Red, nail polish or similar.




There are no customer reviews for this product. However, you can be the first person to add a review for this product.

Log in to submit a review
Add Review

(Your browser will be redirected back to this page)
Related Products