Search
Categories

JK D3 Motor Bracket

> 1/24 Slot Car Parts (by Type) > Motor Brackets > JK D3 Motor Bracket

 
$4.99
SKU:
JKD321
U/M:
Each
Qty:
 
 

JK Products Can Am motor bracket for scratch building chassis.  Bracket is 1" wide with 0.00" hypoid offset between the motor and axle centerlines.

 

Note:  If you plan to use 3/32" x 3/16" Parma Oilites with this motor mount, please see picture below.  You can find the K&S brass tubing here.

 

With a single tube, measure and then mount. Then just cut out the center to make room for the crown gear. You can use two shorter individual sections of tubing instead of having to cut the center out.  If you go the latter route, temporarily insert a second pair of oilites into each tube (i.e. oilites on both ends of each tube).  You can then use an axle to ensure the oilites and tubes are aligned properly while positioning/soldering the tubes in place.

There are no customer reviews for this product. However, you can be the first person to add a review for this product.

Log in to submit a review
Add Review
Name:
Review:
Rating:
 
 
 
 
 
 
 

(Your browser will be redirected back to this page)